The flagship PRO2 is designed for medium to large-scale commercial and residential control applications. Six built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and optional Ethernet provide the essential interface for control of numerous devices including video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. The PRO2 features a built-in power supply, with power available to support external Cresnet devices including touchpanels, keypads and expansion modules.

• 2-Series engine, Dual-bus architecture
• Compact Flash memory card slot
• Cresnet port - master/slave selectable
• 10/100 Ethernet capable | SSL encryption
• e-Control 2 and RoomView enabled
• SNMP support | Built-in firewall, NAT and router
• 6 Com ports, 8 IR/serial ports, 8 Versiport I/O ports, 8 Relay ports
• 3 Y-Bus / 1 Z-Bus control card expansion slots
• Internal power supply, 2-Space EIA rack-mountable
• Front control panel with LCD display

Processor
 

CPU
32-bit Freescale ColdFire Microprocessor


Memory
 

SDRAM
64 MB
 
NVRAM
256 KB
 
Flash
4 MB
 
Compact Flash
expandable up to 2 GB (not included)


Operating System
 Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows and SIMPL+


Ethernet

 
With C2ENET-1
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control2 XPanel and RoomView applications
 
With C2ENET-2
All above features plus: built-in firewall, router, and network address translator (NAT)


Y-Bus Connectors & Expansion Slots
40 Mb/s parallel communications;
Internal backplane for integrated control ports and Y-Bus expansion slots
 
COM A - F
(6) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
Ports C-F support C2N-NPA8 Network Poll Accelerator
 
INFRARED-SERIAL OUTPUT A - H
(8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port allowing simultaneous firing of all ports
 
I/O Versiports 1 - 8
(1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
 
RELAY OUTPUT 1 - 8
(2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
 
Expansion Slots
(3) Y-Bus expansion slots;
Accept all Y-Bus control cards

Z-Bus Expansion Slots
300 Mb/s parallel communications;
Backplane for Z-Bus expansion slots
 
Expansion Slot
(1) Z-Bus expansion slot;
Accepts all Z-Bus control cards


Additional Connectors
 

COMPUTER
(2) DB9 female;
Front and rear panel RS-232 computer console ports
 
NET
(1) 4-pin 5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
 
100-250V~2.3A
50/60 Hz
(1) IEC Socket;
Mates with removable power cord, included
 
Ground
(1) 6-32 screw, chassis ground lug


Reset Buttons
 

HW-R
Hardware reset (reboots the control system)
 
SW-R
Software reset (restarts the SIMPL program)


Menu Buttons

 
FUNCTIONS
(6) Up to 6 dynamically assigned functions based upon current menu
 
MENU
(1) Returns the LCD display to the MAIN menu
 
_, _
(2) Scroll up or down through any list displayed in the LCD display
 
BKLT
(1) Toggles through 4 levels of backlight intensity for the LCD display
 
Refer to the Operations Guide for additional menu functions


LCD Display
(2) lines, (40) characters per line;
Reverse mode (yellow and black) backlit LCD;
Displays system information, configuration menus, and custom programmable user functions


LED Indicators

 
PWR
(1 green) Indicates AC power supplied to unit
 
NET
(1 yellow) Indicates Cresnet bus activity
 
MSG
(1 red) Indicates control system has generated an error message
 
LNK A
(1 red) Indicates a valid connection on LAN port A
 
ACT A
(1 red) Indicates activity on LAN port A
 
LNK B
(1 red) Indicates a valid connection on LAN port B
 
ACT B
(1 red) Indicates activity on LAN port B
 
COM A - F
(TXD, RXD, RTS, CTS)
(24 red) Indicate activity on each respective COM port
 
IR-SERIAL A - H
(8 red) Indicate activity on each respective IR/Serial port
 
INPUT-OUTPUT 1 - 8
(8 red) Indicate activity on each respective I/O Versiport
 
RELAY 1 - 8
(8 red) Indicate contact closure at each respective relay port
 
SLOT 1 - 3
(3 red) Illuminates to indicate presence of a card in the respective expansion slot; extinguishes momentarily to indicate activity


Power Requirements

 
Main Power
2.3 Amps, 100-250 Volts AC, 50/60 Hz
 
Available Cresnet Power
50 Watts (shared with control card expansion slots)


Environmental
 

Temperature
41 Degrees  to 113 Degrees F (5 Degrees  to 45 Degrees C)
 
Humidity
10% to 90% RH (non-condensing)


Enclosure

 
Chassis
Steel, black matte powder coat finish
 
Faceplate
Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
 
Mounting
Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)


Dimensions

 
Height
3.56 in (9.04 cm);
3.47 (8.81 cm) without feet
 
Width
17.03 in (43.26 cm);
19.0 in (48.26 cm) with ears
 
Depth
10.36 in (26.31 cm)

Weight
8.0 lb (3.62 kg) – with line cord