The CENHPRFGW gateway is a 2-way RF transceiver that enables wireless communication and management for up to 16 Crestron "Extended Range" wireless touchpanels and remotes. It is compatible with the Isys TPS6X Wireless Touchpanel, UFO4ER Handheld Wireless Touchpanel, and UFOWPR3ER Waterproof Wireless Remote. • 2-way "Extended Range" RF wireless transceiver/gateway • Supports up to 16 touchpanels and remotes • Dynamic discovery for fast, easy setup • "Wi-Fi friendly" channel selection • Built-in RF network diagnostics • 100 to 200 feet range indoors, 1000 feet outdoors • Supports roaming for extended coverage • Antenna extendable using optional ANTEXT • Crestron Toolbox software configuration and management • Cresnet or Ethernet control system interface • Compatible with TPS6X, UFO4ER, and UFOWPR3ER
Wireless
RF Transceiver
2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant
Transmitting Power
75 mW (Ch.11), 100 mW (Ch.12-23), 15 mW (Ch.24), 3.5 mW (Ch.25), 1 mW (Ch.26) @ High Setting; 1 mW (Ch.11-25), 0.5 mW (Ch.26) @ Low Setting
Range (typical)
100 to 200 feet maximum indoor, 1000 feet outdoor, subject to site-specific conditions
Roaming
Supports roaming amongst up to 8 RF gateways
Maximum 16 "ER" wireless devices per gateway or roaming network
Communications
Ethernet
10BaseT/100BaseTX, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP
Cresnet
Supports Cresnet slave mode
Controls and LED Indicators
PWR
(1) Green LED, indicates DC power supplied from Cresnet network or local power pack
NET
(1) Yellow LED, indicates communication with the Cresnet system
RXD
(1) Red LED, indicates data is being received from wireless network devices
TXD
(1) Red LED, indicates data is being transmitted to wireless network devices
ACQUIRE
(1) Recessed pushbutton with red LED, used to configure the wireless network
SETUP
(1) Recessed pushbutton with red LED, used for touch-settable ID (TSID) and Ethernet autodiscovery
Connectors
LAN
(1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
COMPUTER
(1) 6-pin RJ11 female, computer console port;
Bidirectional RS-232 up to 115.2k baud;
Hardware and software handshaking support;
2 ft (0.6 m) RJ11-to-DB9F adapter cable included
NET
(1) 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
PWR 12VDC 0.5A
(1) 2.5mm barrel DC power jack;
12 Volt DC power input (PW-1205 power pack included)
Power Requirements
Power Pack
0.5 Amps @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205, included
Cresnet Power Usage
2 Watts (85 mA @ 24 Volts DC) with no power pack connected
Enclosure
Metal, matte black finish, freestanding or surface mount (adhesive feet, 3M Dual Lock reclosable fastener, and mounting plate included)
Environmental
Temperature
41 Degrees to 104 Degrees F (5 Degrees to 40 Degrees C)
Humidity
10% to 90% RH (non-condensing)
Dimensions
(Without antenna)
Height
1.30 in (33 mm);
1.22 (31 mm) without feet
Width
4.28 in (109 mm)
Depth
5.60 in (143 mm)
Weight
14.6 oz (414 g)
INTERNATIONAL VERSION (230 VAC)
CENIHPRFGW
All the features and specifications of the CENHPRFGW except:
Power Requirements
Power Pack
0.5 Amps @ 12 Volts DC;
230 Volts AC, 50 Hz power pack, model PWI-1215, included
Cresnet Power Usage
2 Watts (85 mA @ 24 Volts DC) with no power pack connected
|
