The C2NHBLOCK is a parallel distribution block for termination of multiple Cresnet cables. Three different types of connectors are provided to accommodate all types of Cresnet wiring including standard 4-wire Cresnet cable, CAT5/UTP mini-network cable, and RJ11 modular cables. Diagnostic LEDs indicate presence of network power and data. A mounting plate (included) provides for standalone surface mounting, or up to three units may be rack mounted together using the optional CNXRMAK (sold separately.)

Connectors

 
NET A - E
(5) 4-pin 5mm detachable terminal blocks;
Connect to standard 4-wire Cresnet cables
 
NET 1 - 8
(8) 4-pin 3.5mm detachable terminal blocks;
Connect to standard 4-wire or CAT5/UTP mini-network Cresnet cables
 
NET a - c
(3) 6-pin RJ11 female;
Connect to RJ11 modular Cresnet cables


LED Indicators
 

PWR
(Green) indicates that 24VDC Cresnet power is present (at any port)
 
Y
(Red) Indicates presence and integrity of the Cresnet "Y" data signal
 
Z
(Red) Indicates presence and integrity of the Cresnet "Z" data signal

Enclosure
Steel, black matte powder coat finish, surface mount box with removable mounting plate


Dimensions (Including mounting plate)

 
Height
1.27 in (3.23 cm)
 
Width
6.55 in (16.64 cm)
 
Depth
4.30 in (10.92 cm)

Weight
 0.68 lb (0.31 kg) including all supplied terminal block connectors